I will show you 2 ways (manually and
automatically) install Windows 7 via USB stick
Before we start, we need to be prepared are: At least 1buah stick with 4Gb capacitance ato more, because Windows 7 at least take place at 3Gb.
Before we start, we need to be prepared are: At least 1buah stick with 4Gb capacitance ato more, because Windows 7 at least take place at 3Gb.
How to Manual:
1. Plug the USB flash disc. (Enter into the usb port yah, do not to another).
2. Press the WIN + R, type cmd and click OK.
3. Type diskpart and press ENTER.
4. Type list disk, press ENTER and choose which one is USB flash, hati2 mistake select salah2 later that keformat is another disk. if you have only one hard drive USB eat flaskdisknya is disk1.
5. Type select disk 1 and press ENTER.
6. Type clean and press ENTER.
7. Type create partition primary and then press ENTER.
8. Type select partition 1 and press ENTER
9. Type active and press ENTER.
10. Type format fs = fat32 and press ENTER
11. Type assign and press ENTER
12. Type exit and press ENTER.
13. Insert the DVD disc windows 7 and copy all the contents of the DVD was to the USB flash disc.
14. Booting your computer through the USB stick, malalui bios settings on your computer, make sure the boot it via a USB stick, if langkah2nya true, then the process should run windows installation via USB stick.
How to Automatically.
How automatic is certainly my choice, and it is readily available to a program called WinToFlash, the program will perform a manual way langkah2 as above, we need to do is run the program, select the source and the direction of windows 7 USB flash.
1. Download the latest version of WinToFlash program first. (Download link at the end of the article)
2. Extract and run the file WinToFlash.exe
3. Click the "Check" and run the Windows setup transfer wizard.
4. Click "Next"
5. Select the file location and the location of the Windows 7 USB flash disc. click "Next".
6. Select "I Accepted the terms of the license agreement" and click "Continue"
7. Click OK to start formatting your USB stick and file2 windows 7 will automatically be inserted into the USB stick.
8. Click "Next" when finished pengopian and bootinglah your computer via the USB stick before. langkah2nya if true, then the process should run windows installation via USB stick.
Another way specific to Windows 7 can use tools from Microsoft, the Windows 7 USB / DVD Download tool.
After download and install and run the program, the first step select the file location. Iso windows7 us, then step-2 select whether usb flash installed to burn to DVD disc tau.
I recently discovered another new software to make flash us a CD / DVD, flash utility is changing us into installer for windows vista and windows 7. How to wear it pretty easy, just select the location of our flash drives and other CD / DVD windows vista or windows 7 us.
As another way to make us flasdisk to be used to install Windows 7 is to use a tool called EasyBCD, langkah2nya following:
1. For those who do not have EasyBCD program, please download the link at the end of this article:
2. Then plug the flash disc to a USB port of his computer, and then format it with a FAT32 partition using
3. Run EasyBCD program and click the "Bootloader Setup" in the left panel.
4. Under the "Create Bootable External Media", choose the flash that we will create to install windows 7.
5. Then click the "Install BCD" and wait until the following dialog box appears:
Click the "Yes" and then close the program EasyBCD, then enter the Windows 7 DVD into your computer / laptop.
6. After that, copy all the contents of the DVD windows 7 had to flash that we have prepared earlier, if you have a file. Iso windows 7, extract it to a folder first that we have set, then a new copy to flash disc earlier.
7. Done, now flasdisknya it can be used to install windows to a laptop / computer.
Similarly, a new trick to make fd us to be using that to install windows.
And to test whether usb flash disk or DVD windows we succeed or guns can use programs / tools MobaliveCD.
1. Plug the USB flash disc. (Enter into the usb port yah, do not to another).
2. Press the WIN + R, type cmd and click OK.
3. Type diskpart and press ENTER.
4. Type list disk, press ENTER and choose which one is USB flash, hati2 mistake select salah2 later that keformat is another disk. if you have only one hard drive USB eat flaskdisknya is disk1.
5. Type select disk 1 and press ENTER.
6. Type clean and press ENTER.
7. Type create partition primary and then press ENTER.
8. Type select partition 1 and press ENTER
9. Type active and press ENTER.
10. Type format fs = fat32 and press ENTER
11. Type assign and press ENTER
12. Type exit and press ENTER.
13. Insert the DVD disc windows 7 and copy all the contents of the DVD was to the USB flash disc.
14. Booting your computer through the USB stick, malalui bios settings on your computer, make sure the boot it via a USB stick, if langkah2nya true, then the process should run windows installation via USB stick.
How to Automatically.
How automatic is certainly my choice, and it is readily available to a program called WinToFlash, the program will perform a manual way langkah2 as above, we need to do is run the program, select the source and the direction of windows 7 USB flash.
1. Download the latest version of WinToFlash program first. (Download link at the end of the article)
2. Extract and run the file WinToFlash.exe
3. Click the "Check" and run the Windows setup transfer wizard.
4. Click "Next"
5. Select the file location and the location of the Windows 7 USB flash disc. click "Next".
6. Select "I Accepted the terms of the license agreement" and click "Continue"
7. Click OK to start formatting your USB stick and file2 windows 7 will automatically be inserted into the USB stick.
8. Click "Next" when finished pengopian and bootinglah your computer via the USB stick before. langkah2nya if true, then the process should run windows installation via USB stick.
Another way specific to Windows 7 can use tools from Microsoft, the Windows 7 USB / DVD Download tool.
After download and install and run the program, the first step select the file location. Iso windows7 us, then step-2 select whether usb flash installed to burn to DVD disc tau.
I recently discovered another new software to make flash us a CD / DVD, flash utility is changing us into installer for windows vista and windows 7. How to wear it pretty easy, just select the location of our flash drives and other CD / DVD windows vista or windows 7 us.
As another way to make us flasdisk to be used to install Windows 7 is to use a tool called EasyBCD, langkah2nya following:
1. For those who do not have EasyBCD program, please download the link at the end of this article:
2. Then plug the flash disc to a USB port of his computer, and then format it with a FAT32 partition using
3. Run EasyBCD program and click the "Bootloader Setup" in the left panel.
4. Under the "Create Bootable External Media", choose the flash that we will create to install windows 7.
5. Then click the "Install BCD" and wait until the following dialog box appears:
Click the "Yes" and then close the program EasyBCD, then enter the Windows 7 DVD into your computer / laptop.
6. After that, copy all the contents of the DVD windows 7 had to flash that we have prepared earlier, if you have a file. Iso windows 7, extract it to a folder first that we have set, then a new copy to flash disc earlier.
7. Done, now flasdisknya it can be used to install windows to a laptop / computer.
Similarly, a new trick to make fd us to be using that to install windows.
And to test whether usb flash disk or DVD windows we succeed or guns can use programs / tools MobaliveCD.
Tidak ada komentar:
Posting Komentar