install Windows 7

I will show you 2 ways (manually and automatically) install Windows 7 via USB stick

Before we start, we need to be prepared are: At least 1buah stick with 4Gb capacitance ato more, because Windows 7 at least take place at 3Gb.

How to Manual:

   1. Plug the USB flash disc. (Enter into the usb port yah, do not to another).
   2. Press the WIN + R, type cmd and click OK.
   3. Type diskpart and press ENTER.
   4. Type list disk, press ENTER and choose which one is USB flash, hati2 mistake select salah2 later that keformat is another disk. if you have only one hard drive USB eat flaskdisknya is disk1.
   5. Type select disk 1 and press ENTER.
   6. Type clean and press ENTER.
   7. Type create partition primary and then press ENTER.
   8. Type select partition 1 and press ENTER
   9. Type active and press ENTER.
  10. Type format fs = fat32 and press ENTER
  11. Type assign and press ENTER
  12. Type exit and press ENTER.
  13. Insert the DVD disc windows 7 and copy all the contents of the DVD was to the USB flash disc.
  14. Booting your computer through the USB stick, malalui bios settings on your computer, make sure the boot it via a USB stick, if langkah2nya true, then the process should run windows installation via USB stick.

How to Automatically.

How automatic is certainly my choice, and it is readily available to a program called WinToFlash, the program will perform a manual way langkah2 as above, we need to do is run the program, select the source and the direction of windows 7 USB flash.

   1. Download the latest version of WinToFlash program first. (Download link at the end of the article)
   2. Extract and run the file WinToFlash.exe
   3. Click the "Check" and run the Windows setup transfer wizard.
   4. Click "Next"
   5. Select the file location and the location of the Windows 7 USB flash disc. click "Next".
   6. Select "I Accepted the terms of the license agreement" and click "Continue"
   7. Click OK to start formatting your USB stick and file2 windows 7 will automatically be inserted into the USB stick.
   8. Click "Next" when finished pengopian and bootinglah your computer via the USB stick before. langkah2nya if true, then the process should run windows installation via USB stick.

Another way specific to Windows 7 can use tools from Microsoft, the Windows 7 USB / DVD Download tool.

After download and install and run the program, the first step select the file location. Iso windows7 us, then step-2 select whether usb flash installed to burn to DVD disc tau.

I recently discovered another new software to make flash us a CD / DVD, flash utility is changing us into installer for windows vista and windows 7. How to wear it pretty easy, just select the location of our flash drives and other CD / DVD windows vista or windows 7 us.

As another way to make us flasdisk to be used to install Windows 7 is to use a tool called EasyBCD, langkah2nya following:

   1. For those who do not have EasyBCD program, please download the link at the end of this article:
   2. Then plug the flash disc to a USB port of his computer, and then format it with a FAT32 partition using
   3. Run EasyBCD program and click the "Bootloader Setup" in the left panel.

   4. Under the "Create Bootable External Media", choose the flash that we will create to install windows 7.
   5. Then click the "Install BCD" and wait until the following dialog box appears:


      Click the "Yes" and then close the program EasyBCD, then enter the Windows 7 DVD into your computer / laptop.
   6. After that, copy all the contents of the DVD windows 7 had to flash that we have prepared earlier, if you have a file. Iso windows 7, extract it to a folder first that we have set, then a new copy to flash disc earlier.
   7. Done, now flasdisknya it can be used to install windows to a laptop / computer.

Similarly, a new trick to make fd us to be using that to install windows.

And to test whether usb flash disk or DVD windows we succeed or guns can use programs / tools MobaliveCD.

Produktif

Source Monitor

v  · Source Monitor can be used to cut the image, namely by first determining where the right frame we enter into the Timeline. Once we set the frame that we will take and click the button "Set In Point (()" then set up the next frame and press the "Set Out Point ())".
· Then how to put it into the Timeline select the frame first track that we want it to put the pieces of the video, then click the "Insert" on the monitor windows.
· Frames automatically entered into the timeline. Or drag and drop monitor its source. Into the Timeline and the tracks that we choose.
· At this stage is the continuation of the process of the insert on top. ie when we set the frame is another frame in the timeline involved, so join the frame should be discarded.
· To do this: Click the triangle next to the video track,

v  Click set display styles, and select the show frame, then the track will display the video files frame by frame, and we set the zoom in a 1 frame so that no frames are left, then do a cut with the Razor Tool found on ToolsBox, select frame that we will dispose of and press Delete on the keyboard
- Opacity = At the next stage we will try to see the facility located on the Time line Video., The Opacity
· Click the arrows that we have seen the video track Opacity facilities by clicking on Show Key Frame select Show Opacity Handles, where we will see the orange line, its position is at the top that indicates its 100% opacity.
• To change its opacity, previously directed the video pointer on the video frame to determine its key and click the add / remove key frame, after we give keyframe then derive the key frames to change the Opacity.

- Note:
· We can give a lot of key frames on these tracks to determine the opacity that we want

v  · Video & Audio Track we can add up to a few tracks. With how to right click on one track and select add tracks. Then fill the number of tracks that we want to add,.
- Import Text and Templates = In this exercise we will try to provide text and templates in our practice, to provide text click on the File menu> New> Title or right click on your project window and select New Item> Title, it will appear Window Title Designer as below: We are a text content available in the layer,
· And if we want to fill us with tamplate video, his way with the Template button on the windows tersebutt or pressing Ctrl + J,
· The template window will appear, and select the template and press the Apply button

v  · After that we'll be back on the window title, and edit what you want in the edit in accordance with desire, when you close the windows on the edit that title, it will show dialog box, then click the YES button is and keep the title.
· And then the title will go to your windows project
· And then Masukanlah file title to the Timeline us to provide text and templates,
- Effect Video = now starting to give effect to our videos, to give an effect on a video, before we had to call the windows effect. To view click on the menu windownya Windows> effect, then the effect will be visible window.

v  -Adobe Premiere provides various types of effect which is the default effect when we install.

· Now we insert an effect into the video track that we will give effect, do I simply drag and drop effect is one that we think are good.

· Once we put into effect our video track. We give effect to the track have not seen anything, and therefore to see that we give effect to the video must be in the settings / set.

-To adjust the effect, we must open the windows control effect, to show the effect window click on the menu Windows> effect controls.

v  To view the results of the video effect arahkah pointer is in the Timeline window on the video track that we give it effect.

If you want to give effect to certain parts of the video track is given effect, consider the effect control window there is a pointer that indicates the position of the current video on the video track. so to give effect to certain parts of the video that we have to make a key frame in the video by clicking the add / remove key frames.

v 
  By giving we can set the keyframe effect on the video you want.

v  There is a Motion, the motion you can adjust the position, scale your video, it all depends on your creations.

Export File = At this session is the last session in the editing of a video, now we exported our work contained in the timeline window.

To export click on the File menu> Export> Movie dialog box will appear as below, and on export video to AVI format then click Save to export the file, if you want to reset the settings

v  - Process = Process Recording audio recording will be done if we want dubbing voices can we put the video files. Certainly there for dubbing mic, speakers and sound cards work well. To make an audio recording the record button on the navigation like the image below: bitrate window will appear that we will audio tape please accordance with the display settings such windows.
· That is we use the sample rate of 44,100
· Channels, Stereo
· Resolution is 16bit
Click OK, then the recording process will run with the signal shown on the form contained in the main window

v  ·We can make the process of cutting a clip that was recorded by using the drag marks on the mouse and press the delete button.
Then mark the area we will be lost.

- The Editing Process = editing is done to provide audio effects according to what we want.
As an example we want the audio we heard more clearly then we can make the process of eliminating the noise that interferes with the way:
· Click the Effect menu
· Select the noise reduction
· Double-click noise reduction
· Will the new window appears, please click the get profile from selection

v  · It will be seen the results of red, yellow, green.
Click on the preview audio frequencies to listen to the noise reduction.
To increase / decrease the capacity reduction using the scroll bar when the noise reduction level is as desired please click OK

- Advanced Video Editing = DivX is a compressed file that is used to reduce video file. The surplus artifacts when the video file duration 1 hour 15 minutes which is usually in the VCD format of 800 MB, with a compressed DivX file was obtained for 225 MB file size, without reducing the quality of the video file. Disadvantages of this compression, the file can not be played on VCD Player. So that its spread is limited to use on any computer.

v  · DivX Player used to preview DivX file format
· VirtualDub is used for conversion from DivX to AVI format
· TMPGenc program conversion from AVI to MPEG format
So how to restore this DivX format into a format that can be used in ordinary player.

v  How to Use Virtual Dub for conversion to AVI format DivX have 2 phases: open a DivX file formats into AVI format common standard. AVI format used to change the format of MPEG or VCD. For the first phase of change in use VirtualDub software. This software opens with Decoding system from DivX formats into AVI. After Decoding conversion stage, further processing AVI files, and restore the WAV files into MPEG formats. By using a 2GHz P4 processor can convert the movie 1:1 or 1 hour movie takes only 1 hour conversion.

v  TMPGEnc is TMPGenc Software provides Wizard, to help us select the format of Video VCD / MPG, SVCD or DVD. Next input the name of the file from AVI format video and WAV audio Furthermore, we can perform encoding of the program to VCD or MPEG. Time required for this process, together with the duration of the film. Audio Video Editing Guide 16 To save the file encoding results, simply use the burning software, like Nero for burning to CD or VCD format to use this second way is much easier than the first way, because it is using a burning software. But the quality will be reduced compared to the previous way. Burning software that is used is Nero Express.

v  Composition of VCD files
ExplanationVCD INFO.VCDAlbum Files folder and the disc identification ENTRIES.VCDEntry point list for up to 500 entries PSD.VCDOptional Play Sequence Descriptor LOT.VCDOptional List ID Offset fileMPEGAVAVSEQnn.DATMPEG files, max 99 tracks, the main movie, trailers, extras, menus. .. CDDAAUDIOnn.DAT Optional CD Audio files
SEGMENTITEMnnn.DATSegment play items, max 999 segments, still pictures or still menus KARAOKEKARINFO.xxx Optional Karaoke information filesEXTPSD_X.VCDOptional extended version of PSD, VCD version of LOT_X.VCDOptional extended list of LOT.VCD SCANDATA.DATOptional Iframes addresses CAPTnn.DAT Optional Closed Caption dataCDI (undefined) CDI programs and data files.

Photoshop

effect tutorial in photoshop CS 3 tattoos

To create the effect of a digital tattoo with Photoshop, you need to prepare first tattoo design that you will use. You can find it with the help of Google.com.

 

The first step, open both files and drag & drop the parts of the body tattoo design model. Then change the blending modes to multiply and set the position tattoonya be as follows.

 

 

Click Menu Filter> Liquify (Shift + Ctrl + X).

 

At the Liquify, select the Forward Warp Tool (W) and adjust the shape to the hand tattoo model. If so, do not forget to click OK.

 

Click Menu Image> Adjustments> Levels (Ctrl + L). On the Output Levels, drag the black slider to the right to give approximately 70. This will make the color of the tattoo become too dark, to better adjust to the light-colored skin models.

 

Now switch from RGB Channel to Channel Red. Still on the Output Levels, drag the black slider to the right again to give approximately 30. The goal, to give the reddish color of the tattoo so it blends more with the skin color model.

 

kukan masking on the tattoo to give a bit of transparency on the part of the berbackground skin tattoo model with a brighter highlights. The trick, click the Add layer mask and brush Brush Tool (B) with a black color to the skin berbackground tattoo model with a brighter highlights. Use the brush with opacity about 50%.

 

And I get this outcome. Goodluck!

     

 

 

LIGHTING (BASIC)

LIGHTING (BASIC)
3 Basic Lighting:

Key light (Light Lock): Main light source
That is where the light should be positioned first. Its hard. Diposisiskan usually higher than the object or talent and also from the side.

Fill Light (Light Charger):
Light is used as a filler piece that looks dark and also serves to reduce the shadow effect too thick object of key light. Its soft.

Back Light (Light Rear):
Light is used as a separator between the subjects with the background. Back light can be seen diteoian tersinari subject, the light can appear brighter or clearer and more refined.

Nature of Light

hard Light
Hard light is light that has the hardness and an example of what we see sunlight during the day. This comes directly from a light source. Because it comes from a source of light that light raises many dense shadows.

Soft Light
Soft light is light that has the properties of smooth or soft. Which usually can be seen in the shopping areas using incandescent or fluorescent. And its spread and reduce shadows subjects.

How to create soft light:
 Provide front filter the harsh light
 Reflecting with the help of reflector

What should be done a lightingman first:
• Knowing what to bring when going shooting
• Know the tools will understand and use
• Understand the set
• Coordination with the DOP

Produktif

Proposal

What is "Proposal"?

Proposal:

-  It is the translation of the word "proposal" which means "origin", so that the proposal is a proposal / description of the planned activities

- In general the proposal is a form of submission of bids, whether it be ideas, ideas, thoughts, and plans to others for support, permission, approval, funding and so on.

At the time of Proposal Created When?

Proposal Made By the time;

1. will do an activity
2. These activities can be either small or large scale activities, substantiating the proposal, the committee tried to proposal / offer to certain parties
3. Proposal may include a request for help (usually in the form of material assistance / funds / goods) or the shape of bid proposals also are mutually beneficial cooperation

Who and Whom in Create Proposal?
1. Proposal drafted jointly by the committees formed
2. The proposal suggested / offered to certain parties, such as: Donors & Sponsors
3. Party to whom the donor is expected to help in the form of material assistance / goods / funds given freely without reciprocity similar
4. Party donors are usually those who have interest in the kinds of activities that are planned and are willing to assist the smooth operation of a positive
5. The sponsor is the party to whom the offer given the nature of mutually beneficial cooperation between the committee by the sponsor
6. The sponsor is usually the party that is doing the promotion / marketing of a particular product
7. Forms of cooperation with the sponsor in the form of a reciprocal relationship in which the committee will ask for some money / items / facilities to support these activities, while the sponsor requested a facility where he can promote / market their products

Destination Proposal?

1. To conduct research related to religious, social, political, economic and cultural
2. To establish small, medium, or large
3. To apply for tenders from government agencies or private
4. To apply for a loan to the bank
5. For bleak events, seminars, discussions and training.

Systematics / Composition Writing Proposal?
1. Title page
2. Background]
3. Destination Activities
4. Name and Theme Activities
5. Form Activity
6. Participant
7. Organizer
8. Schedules and Locations Activity
9. Composition of Events
10. Composition of Committee
11. Budget Plan
12. Cover
13. Offers (sponsorship)

Explaining Storyboard

Storyboard is another way to explore the possibility of narrative or to train an appearance. Parents say that "a picture can explain a thousand words" is very suitable for storyboarding.

In general, the making of films, comic books and animation, a script was developed before the storyboard created. Lighting the story does not always require Generally, the making of the film, comic books and animation, a script was developed before the storyboard created. Lighting the story does not always require a complete script to take advantage in the process of storyboarding

But we must have stories and stories that have a strong concept. A good storyboard can help us understand a story that is unusual or facilitate the development of the original story.

A storyboard is a series of serial images, with or without words, which tell a continuing story. Art and storyboard sheets are available at the store art needs, but we can also create your own.

STORYBOARD

STORYBOARD

-   A set of sketches that show how the sequence of events occurs.

-   Similar to the cartoon panel, because it has pictures and panels explaining the scene and some possibility of dialogue.

-  In games, storyboard explaining how the game will run. 

 

ANIMATED TIGER

ANIMATED TIGER

 

This time I will share my knowledge about animation ...
guaranteed exciting if you've tried it this animation

software that we use to make these animations is Macromedia Flash

1. First create a new layer and name it with the name of the tiger2. Then click file-import-import to library.3. Find pictures of tigers in Microsoft Office ClipArt. (I took out of Microsoft Office 2007. Not sure if the Microsoft Office 2003 no. Try just looking). Click Ok.4. After the image appears in the window tiger library (Ctrl + L) appears, drag the image into the layer tiger worksheet.5. After that, press F8 to convert to symbol and give it the name of the tiger symbol of type movie clip. Put on the right off the worksheet that are not visible.6. Then create a new layer and name it deer. Like the same way on the number 2 and 3 to find pictures of deer.

ANIMATION CAR

ANIMATION CAR

This animated tutorial is not much different from the animated tiger ..
but the difference was only in the car tire ...
if the Tigers did not use the tire just use the leg. while in this car animation we use the tires so we need to love those tires spinning so as if the car was running

This time animations to be created is the writing being towed by a car, the steps are as follows:
• Make the background layer and then draw a rectangle that meets the stage, give a blue color with shades of color (use the button to set). In addition we can also add the image path. This is for our use as a background or a background image so that the animation look more beautiful.

When finished, lock the background layer by pressing the icons to make it easier to make other objects.
• Create a new layer named layer "car". In frame 1 layer draw a car without wheels cars using existing tools. For a while the car because they were made without the wheel to the wheel we will create movie clip wheel that can rotate.

 

Still on the same layer draw a wheel / tire, wheel image selection and then right click and select convert to symbol will display a new dialog box, name the "tire" and select type "movie clip" OK.
After that double click on the movie clip into the timeline tires for tires. After that, right-click the 20th frame and then select insert keyframe. In the middle of the frame 1-20 right-click and select create motion tween.
• Click on frame 1 and open the Properties panel (Ctrl + F3) and change the option to rotate the contents to "CCW" for the wheel / tire to spin, once it has completed the animation wheel we made ​​(spinning), press Ctrl + Enter to try. Wheels has been completed and can be rotated, but if we look carefully there is a little discrepancy in the rotation wheel. This is because the position of the wheels on the frame 20 with the position of the frame 1.
• Create a new layer and name it "action", right click on the frame layer 19 action and open the action panel (F9) and then type the following script
gotoAndPlay (1);
Wheels has been completed. Out of the timeline wheel / tire then mounted on both the front and rear of the car. Selection of images of cars and tires then right click and select convert to a movie clip symbol, name the "car".

• In frame 1 layer car put the car outside the stage right side, right click and select insert frame 70 keyfame.
• Right-click in the middle frame between frames 1-70 and select create motion tween. At frame 70 to move the cars out of the left side of the stage. Make it as if the car is running on top of the car.
• Create a new layer and name it "formula"
• In frame 1 layerr formula make a rectangle using the rectangle tool (R) then the option at the bottom of the tool pane click menu set corner radius and change the value to 5.
• Write the formula tenses the rectangle using textool (T)

 

Picture strap as binding rectangle was then stretched out as if to touch down to the car. Selection rectangle and string and press Ctrl + G to make it a group or can we convert a movie clip. Put the picture out and stick it right stage strap attached to the car so that if